A bucking machine of professional quality designed specifically for torquing coiled tubing downhole tools.

TruTorkx 10 Overview


The TruTorkx 10 is a state of the art continuous rotating bucking unit that is all contained in one unit for a small footprint and operating area. It has a hydraulically operated tailstock traverse system. The headstock and tailstock are equipped with three self-centering clamp cylinders that extend evenly to secure the work piece. They can handle materials from 1” Thru 4” without changing dies or holders. The tailstock is mounted on a system that allows it to travel the length of the skid to easily change spacing between tailstock and headstock. The Load Cells will be mounted to the tailstock to send torque values to the computer. The load cell provides the most accurate measurement of actual load in both directions to accommodate right and left hand thread configurations.


Headstock Capacity:   1” Thru 4”

Tailstock Capacity:  1” thru 4”

Maximum through hole for headstock and tailstock 5”

Space between headstock and tailstock dies 1”

Die length is 1 15/16”

Makeup Torque:  10K ft. lbs.

Breakout torque:  10K ft. lbs.

Handle Length 12”



20HP 1800RPM TEFC 3PH 60HZ 230/460V 256TC FRAME with a 20HP NEMA 4 Motor Starter and Start/Stop Push buttons.

Complete with 110V outlet for computer system

Pressure compensated piston pump 15 GPM max flow and 3000 PSI max pressure.

50 Gallon Hydraulic reservoir with suction strainer, return filter, filler breather sight glass and clean out hatch.

Hydraulic Oil Cooler with electric powered fan.

All contained in a cabinet below the bucking unit.

Control Console is equipped with four electronic lever operated controls mounted on the bucking unit with a multi-positional swing out arm with gauges, Start/Stop and Emergency Stop Buttons.

Unit does not ship with recommended ISO 68 hydraulic oil.

Overall Size - Length 72” x Width 48” x Height 64”

Copyright Torkx Hydraulics Intl LLC